Cisco CW9179F

Specifications
Four 4x4:4 MU-MIMO 802.11be compatible 24 Gbps quad-radio aggregate frame rate 24x7 real-time WIDS/WIPS and spectrum analytics via dedicated fourth radio Integrated Bluetooth Low Energy beacon and scanning radio Dual 10 Gbps mGig ethernet port support for PoE and link redundancy USB 2.0 host interface (Type A connector) with 9.0W power budget	Enhanced transmit power and receive sensitivity Full-time Wi-Fi location tracking via a dedicated third radio Integrated enterprise security and guest access Application-aware traffic shaping Optimized for voice and video Self-configuring, plug-and-play deployment Common hardware capable of connecting to Meraki dashboard or Cisco Catalyst On-perm deployment
Power Source	2.4-GHz radio / 5-GHz radio / 6-GHz radio / Link speed / USB / Max PoE power consumption
802.3bt (Class 6) (UPOE)	4x4 / 4x4(LB) + 4x4(HB) / 4x4 / 2x 10G / Y (9W) / 47W
802.3at (PoE+) (Quad Radio mode)	2x2 / 2x2 (LB) + 2x2 (HB) / 2x2 / 2x 2.5 G / N / 25.5W
802.3at (POE+) (Tri Radio Mode)	2x2 / 4x4 (FB) / 2x2 / 2x 2.5 G / N / 25.5W
802.3af (PoE)	– / – / – / 1x1G / N / 13.95W
MR44	MR46 / MR56 / CW9166I / CW9178I
DL-OFDMA, UL-OFDMA, TWT support**, BSS coloring**	DL-OFDMA, UL-OFDMA, TWT support**, BSS coloring** / DL-OFDMA, UL-OFDMA, TWT support**, BSS coloring** / DL-OFDMA, UL-OFDMA, TWT support**, BSS coloring** / DL-OFDMA, UL-OFDMA, TWT support**, BSS coloring** MLO
2.4 GHz: 2 x 2 multiple input, multiple output (MIMO) with two spatial streams 5 GHz: 4 x 4 multiple input, multiple output (MIMO) with four spatial streams	2:4GHz: 4 x 4 multiple input, multiple output (MIMO) with four spatial streams 5 GHz: 4 x 4 multiple input, multiple output (MIMO) with four spatial streams / 2.4 GHz: 4 x 4 multiple input, multiple output (MIMO) with four spatial streams 5 GHz: 8 x 8 multiple input, multiple output (MIMO) with eight spatial streams / 2.4 GHz 4 x 4 multiple input, multiple output (MIMO) with four spatial streams 5 GHz: 4 x 4 multiple input, multiple output (MIMO) with four spatial streams 6 GHz: 4 x 4 multiple input, multiple output (MIMO) with four spatial streams / 2.4 GHz 4 x 4 multiple input, multiple output (MIMO) with four spatial streams 5 GHz: 4 x 4 multiple input, multiple output (MIMO) with four spatial streams 6 GHz: 4 x 4 multiple input, multiple output (MIMO) with four spatial streams
Maximal ratio combining (MRC) & beamforming	Maximal ratio combining (MRC) & beamforming / Maximal ratio combining (MRC) & beamforming / Maximal ratio combining (MRC) & beamforming / Maximal ratio combining (MRC) & beamforming
SU-MIMO, UL MU-MIMO and DL MU-MIMO support	SU-MIMO, UL MU-MIMO and DL MU-MIMO support / SU-MIMO, UL MU-MIMO and DL MU-MIMO support / SU-MIMO, UL MU-MIMO and DL MU-MIMO support / SU-MIMO, UL MU-MIMO and DL MU-MIMO support
20 and 40 MHz* channels (802.11n); 20, 40*, and 80 MHz channels (802.11ac Wave 2); 20, 40* and 80 MHz channels (802.11ax)	20 and 40 MHz* channels (802.11n); 20, 40*, and 80 MHz channels (802.11ac Wave 2); 20, 40* and 80 MHz channels (802.11ax) / 20 and 40 MHz* channels (802.11n); 20, 40*, and 80 MHz channels (802.11ac Wave 2); 20, 40* and 80 MHz channels (802.11ax) / 20 and 40 MHz* channels (802.11n); 20, 40*, and 80 MHz channels (802.11ac Wave 2); 20, 40*, 80MHz and 160MHz channels (802.11ax) / 20 and 40 MHz* channels (802.11n); 20, 40*, and 80 MHz channels (802.11ac Wave 2); 20, 40*, 80MHz and 160MHz channels (802.11ax) 320MHz channels (802.11be)
Up to 1024-QAM on both 2.4 GHz & 5 GHz bands	Up to 1024-QAM on both 2.4 GHz & 5 GHz bands / Up to 1024-QAM on both 2.4 GHz & 5 GHz bands / Up to 1024-QAM on all three - 2.4 GHz, 5 GHz and 6 GHz bands / Up to 4096-QAM on all three - 2.4 GHz, 5 GHz and 6 GHz bands
Packet aggregation	Packet aggregation / Packet aggregation / Packet aggregation / Packet aggregation
MR44	MR46 / MR56 / CW9166I / CW9178I
Power over Ethernet: 42.5 - 57 V (802.3at) or 37 - 57 V (802.3af) - low power mode **	Power over Ethernet: 42.5 - 57 V (802.3at compliant) / Power over Ethernet: 42.5 - 57 V (802.3at compliant) / Power over Ethernet: 42.5 - 57 V (802.3at and 802.3bt compliant) / Power over Ethernet: 42.5 - 57 V (802.3at and 802.3bt compliant)
Alternative: 12 V DC input	Alternative: 12 V DC input / Alternative: 12 V DC input / Alternative: 54 V DC input / Alternative: Power Injectors
Power consumption: 30W max (802.3at) or 15W max (802.3af) - low power mode **	Power consumption: 30W max (802.3at required ) / Power consumption: 30W max (802.3at required ) / Power consumption: 30.5W max with USB support and 25W max without USB support / Power consumption: 47W max with USB support and 38W max without USB support
Power over Ethernet injector and DC adapter sold separately	Power over Ethernet injector and DC adapter sold separately / Power over Ethernet injector and DC adapter sold separately / Power over Ethernet injector and DC adapter sold separately / Power over Ethernet injector sold separately
MR44	MR46 / MR56 / CW9166I / CW9178I
1x 100/1000/2.5G BASE-T Ethernet (RJ45)	1x 100/1000/2.5G BASE-T Ethernet (RJ45) / 1x 100/1000/2.5G/5G BASE-T Ethernet (RJ45) / 1x 1000/2.5G/5G BASE-T Ethernet (RJ45) / 2x 1000/2.5G/5/10G BASE-T Ethernet (RJ45)
1x DC power connector (5.5 mm x 2.5 mm, center positive)	1x DC power connector (5.5 mm x 2.5 mm, center positive) / 1x DC power connector (5.5 mm x 2.5 mm, center positive) / 1x DC power connector (8 mm, center positive)
MR44	MR46 / MR56 / CW9166I / CW9178I
12.05" × 5.06" × 1.74" (306.0 × 12.8.4 × 44.3 mm), not including mount plate	12.05" × 5.06" × 1.74" (306.0 × 12.8.4 × 44.3 mm), not including mount plate / 12.83‖ x 5.54‖ x 1.76‖ (326.0 x 140.79 x 44.7 mm), not including mount plate / 9.5 x 9.5 x 2.2 in. (241.3 x 241.3 x 56.9 mm), not including mount plate / 9.9 x 9.9 x 2.0 in. (250 x 250 x 51 mm), not including mount plate
Weight: 26.07 oz (0.739 kg)	Weight: 1.76lbs (0.800 kg) / Weight: 2.2lbs (1 kg) / Weight: 3.54lbs (1.60kg) / Weight: 4.1lbs (1.87kg)
2.4 GHz Radio	5 GHz Radio / 6 GHz Radio
Category
Specifications
Standard
Radios
Tri-radio mode (Default): 2.4 GHz 802.11 b/g/n/ax/be client access radio 5 GHz 802.11 a/n/ac/ax/be client access radio 6 GHz 802.11 ax/be client access radio Quad-radio mode: 2.4 GHz 802.11 b/g/n/ax/be client access radio 5 GHz 802.11 a/n/ac/ax/be client access radio (UNII-1 & 2 bands) 5 GHz 802.11 a/n/ac/ax/be client access radio (UNII-2E & 3 bands) 6 GHz 802.11 ax/be client access radio 2.4 GHz, 5 GHz, and 6 GHz tri-band Air Marshal WIDS/WIPS, spectrum analysis, & location analytics radio Due to the 6 GHz band requiring PMF some Air Marshal functions may not be effective 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support Concurrent operation of all five radios. BLE version (5.3), software upgradable to 6.0 in the future. Supported frequency bands (country-specific restrictions apply): 2.401 - 2.484 GHz 5.150 - 5.250 GHz (UNII-1) 5.250 - 5.350 GHZ (UNII-2A) 5.490 - 5.730 GHz (UNII-2C) 5.735 -5.825 GHz (UNII-3)
GPS
Built-in GPS/ GNSS
Antenna
2.4-GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth 5-GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth 5 GHz: (XOR) Peak gain 5 dBi, internal antenna, omnidirectional in azimuth 6-GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth
802.11ax, 802.11ac Wave 2 and 802.11n Capabilities	DL-OFDMA, UL-OFDMA, TWT support, BSS coloring 4 x 4 multiple input, multiple output (MIMO) with four spatial streams SU-MIMO, UL MU-MIMO, and DL MU-MIMO support Maximal ratio combining (MRC) & beamforming 20 and 40 MHz channels (802.11n); 20, 40 and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax) Note: 40MHz channels are supported only in the 5GHz band. Up to 1024-QAM on both 2.4 GHz and 5 GHz bands Packet aggregation
802.11be Capabilities
Up to 4096-QAM on 2.4 GHz, 5 GHz and 6 GHz bands 20 MHz channels on 2.4 GHz bands 20, 40, 80, 160 MHz on 5 GHz bands 20, 40, 80, 160, 320 MHz on 6 GHz bands MLO (Multi-link operation) across different bands MRU (Multiple Resource Unit) allocation in OFDMA 4 x 4 multiple input, multiple output (MIMO) with four spatial streams
Power
Power over Ethernet: 802.3bt/ 802.3at/ 802.3af Power reservation: 60W max (802.3bt required for full operation) Power over Ethernet injector sold separately Note: Actual power consumption may vary depending on access point usage. It is recommended that you ensure that Link Layer Discovery Protocol (LLDP)/Cisco Discovery Protocol is enabled to allow proper power negotiation. Recommended Power Injector: CW-INJ-8: Cisco Wireless 802.3bt Power Over Ethernet Injector (power cable separate SKU) Supported Power Injectors: MA-INJ-6: Meraki Multigigabit 802.3bt Power over Ethernet Injector (power cable separate SKU) Cisco AIR-PWRINJ-7 802.3bt Power cord - MA-PWR-CORD-XX (XX Country Code) should be ordered separately for the Ethernet injector
Interfaces
2x 100M/ 1G/ 2.5G/ 5G/ 10G BASE-T Ethernet (RJ45) Management console port (RJ-45) USB 2.0 at 9W
Mounting
All standard mounting hardware included Desktop, ceiling, and wall mount capable Ceiling tile rail (9/16, 15/16 or 1 1⁄2‖ flush or recessed rails), assorted cable junction boxes
Physical Security
Kensington lock slot
Environment
Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25°C (77°F) at 15,000 ft (4570 m) Operating temperature: 32° to 122°F (0° to 50°C) Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40°C (104°F) at 9843 ft (3000 m) Humidity:10% to 90% non-condensing
Reliability
Mean time between failure (MTBF): 942,282 hrs at +25°C operating temperature
Physical Dimensions
9.9x9.9x2.0 inches (25x25x5.1 cm) Weight: 4.1 lb (1.87 kg)
Security
Integrated Layer 7 firewall with mobile device policy management Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal Flexible guest access with device isolation VLAN tagging (802.1q) and tunneling with IPsec VPN PCI compliance reporting WPA2-PSK, WPA2-Enterprise, WPA3 - Personal, WPA3 - Enterprise, WPA3 - Enhanced Open (OWE) EAP Local authentication - EAP-TTLS/PAP, PEAP-GTC, EAP-TLS Advanced Encryption Standard (AES) Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration Cisco ISE integration for Guest access and BYOD Posturing
Quality of Service
Advanced power save (U-APSD) WMM access categories with DSCP and 802.1p support Layer 7 application traffic identification and shaping
Mobility
PMK, OKC, and 802.11r for fast layer 2 roaming Distributed or centralized layer 3 roaming
Analytics
Embedded location analytics reporting and device tracking Global layer 7 traffic analytics reporting per network, per device, and per application
LED Indicators
1 power/booting/firmware upgrade status 1 link state, 1 Tx/ Rx LED ethernet port
Regulatory
RoHS For additional country-specific regulatory information, please contact Meraki sales
Warranty
Indoor access point Lifetime hardware warranty with advanced replacement included
Ordering Information
CW9178: Cisco Wireless 9178I (Wi-Fi 7, 4 radio, 3 band 4x4, UWB), Global Use Recommended Power Injector: CW-INJ-8: Cisco Wireless 802.3bt Power Over Ethernet Injector (power cable separate SKU) Supported Power Injectors: MA-INJ-6: Meraki Multigigabit 802.3bt Power over Ethernet Injector (power cable separate SKU) Cisco AIR-PWRINJ-7 802.3bt Power cord - MA-PWR-CORD-XX (XX Country Code) should be ordered separately for the Ethernet injector Mounting bracket: AIR-AP-BRACKET-1 AIR-AP-BRACKET-2 Meraki access point license required
IEEE Standards
802.3 ab/bz 802.3 af/at/bt 802.11a/b/g/n/ac/ax/be 802.11d/h/i/k/r/u/v/w
Certifications
Wi-Fi Alliance: Wi-Fi 7 (R1), Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security Bluetooth SIG: Bluetooth Low Energy
Safety Approvals
CSA and CB 60950 & 62368 EN 60601 certified Conforms to UL 2043 (Plenum Rating)
Radio Approvals
FCC Part 15C 15E RSS-247 (Canada) EN 300 328 ( v2.1.1) EN 301 893 (v2.1.1) AS/NZS 4268 (Australia/NZ) NOM-121 (Mexico) NCC LP0002 (Taiwan) For additional country-specific regulatory information, please contact Meraki sales
EMI Approvals (Class B)
FCC Part 15B ICES-003 (Canada) EN 301 489-1-17 EN 55032 EN 55024 (Europe) CISPR 32 (Australia/NZ) VCCI (Japan)
Exposure Approvals
FCC Part 2 RSS-102 (Canada) EN 50385 EN 6231 EN 62479 (Europe) AS/NZS 2772 (Australia/NZ)

>MCS614.5 / -78MCS714.5 / -77MCS814 / -722.4 GHz802.11ax (HE20) / MCS0 / 19 / -93MCS119 / -90MCS219 / -88MCS319 / -85MCS419 / -81MCS514.5 / -77MCS614.5 / -76MCS714.5 / -75MCS814 / -70MCS914 / -68MCS1013.5 / -65MCS1113.5 / -63Operating BandOperating Mode / Data Rate / TX Power (conducted) / RX Sensitivity5 GHz802.11a / 6 Mb/s / 17.5 / -929 Mb/s17.5 / -9112 Mb/s17.5 / -8918 Mb/s17.5 / -8724 Mb/s15 / -8336 Mb/s15 / -8048 Mb/s15 / -7654 Mb/s15 / -765 GHz802.11n (HT20) / MCS0 / 17.5 / -93MCS117.5 / -90MCS217.5 / -88MCS317.5 / -85MCS417.5 / -81MCS513.5 / -77MCS613.5 / -76MCS713.5 / -755 GHz802.11n (HT40) / MCS0 / 17.5 / -91MCS117.5 / -88MCS217.5 / -86MCS317.5 / -83MCS417.5 / -79MCS513.5 / -75MCS613.5 / -74MCS713.5 / -735 GHz802.11ac (VHT20) / MCS0 / 17.5 / -94MCS117.5 / -91MCS217.5 / -89MCS317.5 / -86MCS417.5 / -82MCS513.5 / -78MCS613.5 / -77MCS713.5 / -76MCS813.5 / -705 GHz802.11ac (VHT40) / MCS0 / 17.5 / -91MCS117.5 / -88MCS217.5 / -86MCS317.5 / -83MCS417.5 / -79MCS513.5 / -75MCS613.5 / -74MCS713.5 / -73MCS813.5 / -68MCS913.5 / -675 GHz802.11ac (VHT80) / MCS0 / 17.5 / -88MCS117.5 / -85MCS217.5 / -83MCS317.5 / -80MCS417.5 / -76MCS513.5 / -72MCS613.5 / -71MCS713.5 / -70MCS813.5 / -65MCS913.5 / -645 GHz802.11ax (HE20) / MCS0 / 17.5 / -93MCS117.5 / -92MCS217.5 / -88MCS317.5 / -85MCS417.5 / -81MCS513.5 / -77MCS613.5 / -76MCS713.5 / -75MCS813.5 / -70MCS913.5 / -68MCS1012 / -65MCS1112 / -605 GHz802.11ax (HE40) / MCS0 / 17 / -91MCS117 / -88MCS217 / -86MCS317 / -83MCS417 / -79MCS513.5 / -75MCS613.5 / -74MCS713.5 / -73MCS813.5 / -68MCS913.5 / -66MCS1012 / -63MCS1112 / -625 GHz802.11ax (HE80) / MCS0 / 17 / -88MCS117 / -85MCS217 / -83MCS317 / -80MCS417 / -76MCS513.5 / -72MCS613.5 / -71MCS713.5 / -70MCS813.5 / -65MCS913.5 / -63MCS1012 / -60MCS1112 / -59CategorySpecificationsStandardsRadios2.4 GHz 802.11b/g/n/ax client access radio
2.4 GHz Bluetooth® Low Energy (BLE 5) radio with Beacon and BLE scanning support
5 GHz 802.11a/n/ac/ax client access radio
Supported frequency bands (country-specific restrictions apply)
Supported frequency bands (country-specific restrictions apply):
2.412 - 2.484 GHz
5.150 - 5.250 GHz (UNII-1)
5.250 - 5.350 GHZ (UNII-2A)
5.490 - 5.730 GHz (UNII-2C)
5.735 - 5.825 GHz (UNII-3)AntennaInternal Antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz)802.11ax, 802.11ac Wave 2 and 802.11n CapabilitiesDL-OFDMA**, UL-OFDMA**, TWT support**, BSS Coloring**
2 x 2 multiple input, multiple output (MIMO) with two spatial streams
SU-MIMO, UL MU-MIMO** and DL MU-MIMO support
Maximal ratio combining (MRC) & beamforming
20 and 40 MHz* channels (802.11n); 20, 40*, and 80 MHz channels (802.11ac Wave 2); 20, 40* and 80 MHz channels (802.11ax)
Note:
*40MHz channels are supported only in the 5GHz band.
Up to 1024-QAM on both 2.4 GHz & 5 GHz bands
Packet aggregationPowerNote:
Only MA-PWR-30W-XX (XX - AU, EU, CN, UK, US) AC adapters are compatible with MR28. Previous generations of AC adapters are
not
compatible with MR28.
Power over Ethernet: 37 - 57 V (802.3af compatible)
Power consumption: 15W max (802.3af). Note: actual power consumption may vary depending on the AP usage.
Power over Ethernet injector sold separately
Note:
Actual power consumption may vary depending on the AP usage.Interfaces1x 10/100/1000 BASE-T Ethernet (RJ45)Physical SecurityTwo security screw options (included) (10 mm long and 2.5 mm diameter and 4.7 mm head)
Concealed mount plate with anti-tamper cable bayEnvironmentOperating temperature: 32 °F to 104 °F (0 °C to 40 °C)
Humidity: 5 to 95% non-condensing
Operating altitude: Up to 40,000 feet (12,192 meters)ReliabilityMean Time Between Failure (MTBF): 257,215hrs at +25°C operating temperaturePhysical Dimensions7.95” x 4.88” x 1.02” (202 mm x 124 mm x 25.8 mm), not including deskmount feet or mount plate
Weight: 9.6 oz (272 g)SecurityIntegrated Layer 7 firewall with mobile device policy management
WIDS/WIPS with alerting and rogue AP detection with Air Marshal (performed opportunistically with best-effort on client-serving radios)
Flexible guest access with device isolation
VLAN tagging (802.1q) and tunneling with IPsec VPN
PCI compliance reporting
WEP*, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal, WPA3 - Enterprise, WPA3 - Enhanced Open (OWE)**
EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
TKIP and AES encryption
Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
Cisco ISE integration for Guest access and BYOD PosturingQuality of ServiceAdvanced Power Save (U-APSD)
WMM Access Categories with DSCP and 802.1p support
Layer 7 application traffic identification and shapingMobilityPMK, OKC, & 802.11r for fast Layer 2 roaming
Distributed or centralized layer 3 roamingAnalyticsEmbedded location analytics reporting and device tracking
Global L7 traffic analytics reporting per network, per device, & per applicationLED Indicators1 power/booting/firmware upgrade statusRegulatoryRoHS
For additional country-specific regulatory information, please contact Meraki salesWarrantyIndoor access point
Lifetime hardware warranty with advanced replacement includedOrdering InformationMR28-HW: Meraki MR28 Cloud Managed 802.11ax AP
MA-INJ-4: Meraki MR 802.3at PoE Injector (Power Cord Not Included)
MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector (Power Cord Not Included)
Note: Meraki access point license required.IEEE Standards802.11a, 802.11ac, 802.11ax, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11k, 802.11n, 802.11r, and 802.11u***Safety ApprovalsCSA and CB 60950 & 62368
Conforms to UL 2043 (Plenum Rating)Radio ApprovalsCanada: FCC Part 15C, 15E, RSS-247
Europe: EN 300 328, EN 301 893
Australia/NZ: AS/NZS 4268
Mexico: IFT, NOM-208
Taiwan: NCC LP0002
For additional country-specific regulatory information, please contact Meraki SalesEMI Approvals (Class B)Canada: FCC Part 15B, ICES-003
Europe: EN 301 489-1-17, EN 55032, EN 55024
Australia/NZ: CISPR 22
Japan: VCCIExposure ApprovalsCanada: FCC Part 2, RSS-102
Europe: EN 50385, EN 62311, EN 62479
Australia/NZ: AS/NZS 2772firmware upgrade status
1 link state, 1 Tx/ Rx LED ethernet portRegulatoryRoHS
For additional country-specific regulatory information, please contact Meraki salesWarrantyIndoor access point
Lifetime hardware warranty
with advanced replacement includedOrdering InformationCW9178: Cisco Wireless 9178I (Wi-Fi 7, 4 radio, 3 band 4x4, UWB), Global Use
Recommended Power Injector:
CW-INJ-8: Cisco Wireless 802.3bt Power Over Ethernet Injector (power cable separate SKU)
Supported Power Injectors:
MA-INJ-6: Meraki Multigigabit 802.3bt Power over Ethernet Injector (power cable separate SKU)
Cisco AIR-PWRINJ-7 802.3bt
Power cord - MA-PWR-CORD-XX (XX Country Code) should be ordered separately for the Ethernet injector
Mounting bracket:
AIR-AP-BRACKET-1
AIR-AP-BRACKET-2
Meraki access point license requiredIEEE Standards802.3 ab/bz
802.3 af/at/bt
802.11a/b/g/n/ac/ax/be
802.11d/h/i/k/r/u/v/wCertificationsWi-Fi Alliance:
Wi-Fi 7 (R1), Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security
Bluetooth SIG:
Bluetooth Low EnergySafety ApprovalsCSA and CB 60950 & 62368
EN 60601 certified
Conforms to UL 2043 (Plenum Rating)Radio ApprovalsFCC Part 15C
15E RSS-247 (Canada)
EN 300 328 ( v2.1.1)
EN 301 893 (v2.1.1)
AS/NZS 4268 (Australia/NZ)
NOM-121 (Mexico)
NCC LP0002 (Taiwan)
For additional country-specific regulatory information, please contact Meraki salesEMI Approvals (Class B)FCC Part 15B
ICES-003 (Canada)
EN 301 489-1-17
EN 55032
EN 55024 (Europe)
CISPR 32 (Australia/NZ) VCCI (Japan)Exposure ApprovalsFCC Part 2 RSS-102 (Canada)
EN 50385
EN 6231
EN 62479 (Europe)
AS/NZS 2772 (Australia/NZ)